| The York part number for your tensioner is: |
DP4UB-3G28A107-S71PE-ACS |
|
|
|
|
This is an IN STOCK, ready to ship tensioner.
|
| Dynamic Pivot Tensioner |
| Size: | 4 |
| Bushing Type: | Sliding bushing with hardware |
| Idler pulley profile: | 3mm GT |
| Dia (if flat) or #of grooves: | 28 |
| Idler pulley material: | Aluminum |
| Idler pulley width: | 10.7mm wide
10.7mm is stock idler pulley width, others available as made to order |
| Bearing type: | Sleeved self-lubricating plastic |
| Clearance height: | 7.1mm clearance under idler pulley |
| Hardware head type: | Phillips |
| Thread type: | 10-32 threads, .50 inches long |
| Arm movement: | Counterclockwise (anti-clockwise) arm movement from base |
| Spring strength: | Standard - up to 5 pounds force on belt |
| Shaft length: | Standard |
| In Stock: | In stock, ready to ship tensioner |
