| The York part number for your tensioner is: |
DS4UB-F100L42-N23PE-PS |
| |
|
|
This is an IN STOCK, ready to ship tensioner.
|
| Dynamic Slot Tensioner |
| Size: | 4 |
| Bushing Type: | Sliding bushing with hardware |
| Idler pulley profile: | Flat (no grooves) |
| Dia (if flat) or #of grooves: | 1 inch |
| Idler pulley material: | Self-lubricating plastic |
| Idler pulley width: | .42 inches wide
.42in is stock idler pulley width, others available as made to order |
| Clearance height: | .23 inches clearance under idler pulley |
| Hardware head type: | Phillips |
| Thread type: | 10-32 threads, .50 inches long |
| Spring type: | Compression (standard spring in photo - pushes on idler pulley) |
| Spring strength: | Standard - up to 5 pounds force on belt |
| Shaft length: | Standard |
| In Stock: | In stock, ready to ship tensioner |
